Where should you place a parking QR so it scans?
If setup looks fine but people cannot scan on the street, the sticker is usually the problem: placement, glare, or dirt. This guide covers where to put it, what to avoid, and how to check it yourself.
Two rules first
It must be visible from outside, and it must not block the driver’s view. If those clash, use a smaller sticker on the side rather than a large one in the centre.
Scanners stand outside, close to the car. Face the code toward the pavement or lane, not toward cabin clutter.
Placements that usually work
Inside the front windscreen on the passenger side is a common default. People can see it, wipers hit it less often, and it stays out of the main sight line.
The driver’s side window can work if it is legal, does not block vision, and is not covered by the mirror mount. Thick frames can force awkward scan angles—test with a phone before you commit.
If you use a dedicated holder or temporary parking card area, keep the QR and a short “scan to request a move” note in the same sight line.
Places to avoid
Wiper arcs, permit clips, fresheners, and toys that cover the code. A big sticker in the centre of the windscreen is risky for vision and for enforcement disputes.
High-gloss laminate in direct sun makes cameras hunt for focus. Sharp curves warp the code. The rear window is a weak sole placement if luggage or headrests hide it.
Print and materials
Keep contrast high. Print a test size and scan from one or two steps away. Home printers or convenience-store cloud print both work. If you laminate, prefer a less reflective finish. Replace peeling or dirty stickers instead of hoping.
Field check
Scan with another phone on another network. Confirm the page loads, the plate is correct, a notice can be sent, and your channel rings. Test in bright sun and at night. Recheck after a week for water marks, fade, or wiper scratches.
For full setup, see the QR move-car guide. For damaged or leaked codes, see replace or disable a move-car QR.
Adjust for vehicle type and light
SUVs and vans often need a slightly larger code or a side-window placement at eye height. Motorcycle codes must stay flat; curves break scanning. Test in sun and under streetlights. Wipe dirt, flatten edges, and keep a digital file ready for reprinting.